Print this page blog feed


March – April 2014

C-9 frt w
Sauber Mercedes C9 
by Dale King
European Touring Cars
by John Cully


Can-Am and Prototypes
by Greg Sacho

March – April 2014 2014/04/21 21:23

Sauber Mercedes C9

C-9 frt w

1/12 Sauber Mercedes C9
Full Scratch Build by Dale King

C-9 hi side w


C-9 rr w

close rear w

Sauber Mercedes C9 2014/04/21 21:23

European Touring Cars


1/24 LIQUI MOLY Ford XR4Ti
by John Cully


A set of updated (improved) photos of my recently completed XR4Ti model.



1/24 1976 DRM Opel Kadett
by John Cully

Converted from a Quattroruote/Fabbri 1/24th scale diecast.


This represents one of those ‘what might have been’ subjects, achieving very little. In similar vein to the 1970 Chrysler TransAm attempt, this car failed to live up to expectations. The men in grey suits thought that it would simply be a question of turning up at the circuits and being able to run competively from the starting flag against teams such as Zakspeed and GS.


Insufficient time (and effort!) was given, and the plug was pulled after one year.

European Touring Cars 2014/04/21 21:23

Can-Am and Prototype Cars


1/20 Shadow Can-Am
by Greg Sacho



1/24 Spice GTP
by Greg Sacho




Can-Am and Prototype Cars 2014/04/21 21:23

January-February 2014

Building the Chaparrals 
by Henry Trent
NNL West 2014


Corvette C7R and Z06
by Mike Kendel

January-February 2014 2014/02/14 18:02

Building the Chaparrals


Building the Chaparrals in 1/24 Scale
by Henry Trent

This collection includes Chaparrals 2A through 2H. 2G and 2J are on the way.


Chaparral 2A, Sebring 1965 


This model began as a Cox slot car body. I added a Modelers interior and wheels and opened up the body for the exhausts, which are made from aluminum tubing. Decals are from Patto’s Place. 


Chaparral 2C, Nassau 1965


The 2C body is from the LS kit. I opened the body panels and added mesh screens. 


Chaparral 2D, Daytona 1966



Based on the Monogram kit, the early 2D also has wheels and tires from the Fisher kit. The intake stacks are from the Revell parts pack.


Chaparral 2D, Nurburgring 1966



This late version 2D is from the Modelers kit, built out of the box.


Chaparral 2E, Laguna Seca 1966



2E – This is the Fisher kit – build out of the box.


Chaparral 2F, Le Mans 1967


2F – This is the Fisher kit – build out of the box.


Chaparral 2H, 1969


2H – From the kit by Mini-Exotics. 

Building the Chaparrals 2014/02/14 17:54

NNL West 2014

Photos by Kevin J. Stewart


NNL West 2014 2014/02/14 17:53

Corvette C7R and Z06

Thanks to Mike Kendel for sending in these photos of the new racing (C7R) and road (Z06) versions of the new Vette.

Corvette C7.R

image007 image008 image009 image010 image013 image011 image012 image001 image002 image003 image004 image005 image006

Corvette Z06


image005 image006 image007 

image009 image010 image011 image012

image013 image014 image015 image016 image017 image018 image019 image020 image021  image008 

Corvette C7R and Z06 2014/02/14 17:53

November-December 2013

Four Porsche 908s 
by Dale W. King
Porsche 917 Salzburg
by David Sorensen
Holiday Buyer’s Guide

November-December 2013 2013/12/16 18:52

Four Porsche 908s


Four Porsche 908s in 1/12 Scale
by Dale W. King

908-frt 2-w

Porsche 908/2 (1969)
This one was based on a very crude kit out of Mexico that I had Motoi Shiozawa/Hapico get for me. I basically saved the body, which I heavily modified, and tossed the rest of the kit away (this was my intention before I even got the ‘kit’).

3_4 lft prm w

You can see by the photo just a few of the mods made to the body.


Scratch built pieces include : chassis/frame (the frame is done in brass), just about everything in the cockpit, the entire engine/trans, rear view mirror, rims, tires, tail & head lights, front head light covers and on and on. 

908-top 2-w

The windshield was made by pulling clear sheet vinyl over a polished buck I had made. The body paint is Tamiya gloss white (TS26) and pink (TS25). It was rubbed out with Tamiya polish. 

908-rr 2-w

Even though I dumped the majority of the kit, I did use some of the kit decals. The scratch built wheels and brakes are held in place with the custom center lock nuts.

pre decal frt

Porsche 908/2 LH (1970)
The 908/2 LH is 100% scratch built from my own plans.


The basic body was built up of individual pieces of Renshape cut out on my bandsaw, glued together and shaped.

rough-cut-1 rough-cut-2

The tail lights are created out of Lucite, shaped, backed up with BareMetal and then painted with Tamiya clear red and orange.

final-lites tear-mold-castings mirror rough

For head light covers I created patterns and pulled heated clear plastic over them. The rear brake air scoops were done the same way. The fuel injection ‘hats’ and tear drop shapes located on the rear deck were cast in resin from my own patterns. The rims are also castings from my own originals. The tires were individually turned on the lathe and the center lock nuts actually hold the wheels on. The disc brakes are made up from my own castings. I did artwork for the original p/e magnesium patterns and then made RTV molds. Things like the gas caps and head lights (both bezels and lenses) were turned in aluminum on a lathe. All the colors on the body were done using Tamiya spray paint ( pure white (TS26), bright red (TS49), chrome yellow (TS47) and racing green (TS43). Masking was done with Tamiya tape.

no decals rr

I still have to complete the artwork for the decals and have them printed up on an Alps.


Porsche 908/3 (1971)
This model, which is also totally scratch built from my own plans, was completed nearly 40 years ago. The body was carved in balsa wood then fiberglassed using 3/4 oz. model airplane cloth. Afterward most of the underlying balsa was removed creating a hollow shell. This is the one and only time I used this method.


The frame was done in brass tubing. The roll bar and rear support bars were plated in nickel and then clear coated.


The engine/engine bay was scratch built using Lucite, resin castings, styrene, brass, copper and aluminum. The rims, tires and many other components were cast up from molds I made from my original patterns. The body was painted using Ditzler automotive lacquer – I really miss that product…. it was outlawed many years ago here in California.


The multi colored area that runs across the nose and up the front fenders and the black roundels with white number were hand painted. The lettering elsewhere was done with press type. Very “old school”…. pre computers. I was very fortunate to have full access to a real 908. I spent many hours photographing and measuring it.


Porsche 908/4 (1979/80)
This started out as a rare styrene R/C body by Tamiya. The basic body was there but everything else had to be scratch built: chassis/interior, dash, seats, steering wheel, rims, tires, brakes, rear frame, turbos (these are resin copies made using Tamiya parts as masters), mirrors, etc.


The paint was Ditzler white lacquer that was rubbed out with Semi Chrome polish. The decals were printed up by Derek Collins in his high school print shop in the early to mid 1980s. I wanted to do another version of this car but, even when I built this many years ago, I was unable to find another body.


The real car body was a strange combination of a 908/3 nose, 936 cockpit surround/engine hump/air scoop and 917/10 rear fins and wing. Instead of the 908 fuel injected flat 8 engine it had a flat 6 twin turbo.


When finished I photograph my models out doors in open shade on one of several 12th scale ‘sets’. I wanted to do a fifth 908 – a short tail coupe and thought I could base it on the Tamiya 910 but it turns out the bodies are just enough different that it wouldn’t work. Too bad . . . it would have been a nice addition.

Four Porsche 908s 2013/12/16 18:51

Previous page: Tamiya Model Magazine
Next page: Scale Model Projects